« Tools · Electrical Calculators
Resistor Color Code Calculator
Select the band colours in order to see the resistance, tolerance and value range.
How to use
- Choose the number of bands (4 or 5).
- Select the colours from left to right; the tolerance band usually sits apart.
- The resistance and tolerance range appear.
Method and assumptions
- On a 4-band resistor the first two bands are digits, the third is the multiplier and the fourth the tolerance. On a 5-band resistor the first three are digits.
- Digits: black 0, brown 1, red 2, orange 3, yellow 4, green 5, blue 6, violet 7, grey 8, white 9. Gold is ×0.1 and silver ×0.01.
- Tolerance: brown ±1 %, red ±2 %, gold ±5 %, silver ±10 %.
Example: yellow-violet-red-gold
Yellow = 4, violet = 7, red = ×100, gold = ±5%. The value is 47 × 100 = 4700 Ω = 4.7 kΩ with ±5% tolerance; the real value can be between 4465 Ω and 4935 Ω.
Colour code table
| Colour | Digit | Multiplier | Tolerance |
|---|---|---|---|
| Black | 0 | ×1 | — |
| Brown | 1 | ×10 | ±1% |
| Red | 2 | ×100 | ±2% |
| Orange | 3 | ×1 k | — |
| Yellow | 4 | ×10 k | — |
| Green | 5 | ×100 k | ±0.5% |
| Blue | 6 | ×1 M | ±0.25% |
| Violet | 7 | ×10 M | ±0.1% |
| Grey | 8 | ×100 M | ±0.05% |
| White | 9 | ×1 G | — |
| Gold | — | ×0.1 | ±5% |
| Silver | — | ×0.01 | ±10% |
Common mistakes
- Reading from the wrong end: hold the resistor with the tolerance band (gold, silver) on the right; the band nearest the tolerance usually has a wider gap.
- Mixing 4-band and 5-band: on a 5-band resistor the first three bands are digits and the fourth is the multiplier.
- Confusing colours: red-orange, brown-red or grey-violet pairs can blur in light; measure with a multimeter if unsure.
- Ignoring tolerance: in precise circuits prefer 1% over 5% resistors.
Frequently asked questions
Which way do I read a resistor?
Start from the end where the bands are closer to the edge, with the tolerance band (usually gold or silver) on the right.
What is yellow-violet-red-gold?
47 × 100 = 4700 Ω, i.e. 4.7 kΩ ± 5 %.
What is a 5-band resistor for?
Precision resistors that need three significant digits and tight tolerance (typically ±1 %).
Which end do I read from?
Hold it with the gold or silver tolerance band on the right and read left to right.
What are 5-band resistors for?
The first three bands are digits, so they give a more precise value (e.g. 4.02 kΩ) and usually a tighter tolerance (1% or better).
More tools
© ZDK Mühendislik — the software of this tool may not be copied or reused on other sites without permission.