« Tools · Electrical Calculators
Ohm's Law Calculator
Enter any two of voltage, current, resistance and power; the other two are calculated instantly.
Calculations run in your browser; the data you enter is never sent to any server.
Results are for preliminary design and checking only. Final design must follow the applicable standards, the manufacturer's catalogue and approval by a qualified engineer; ZDK Mühendislik accepts no liability for how results are used.
How to use
- Enter the two values you know and leave the other two empty.
- Results appear instantly; calculated values are bold.
- Clear the boxes to try another pair.
Method and assumptions
- Ohm's law: V = I × R. Power: P = V × I = I² × R = V² / R.
- Valid for DC and purely resistive AC circuits; for inductive/capacitive loads the power factor must be considered separately.
- Exactly two values must be entered.
Three examples
| Known | Result |
|---|---|
| 230 V, 10 A | Resistance 23 Ω, power 2300 W |
| 12 V, 60 W | Current 5 A, resistance 2.4 Ω |
| 2 A, 100 W | Voltage 50 V, resistance 25 Ω |
Formula table
| Two known values | Voltage V | Current I | Resistance R | Power P |
|---|---|---|---|---|
| V and I | — | — | V / I | V · I |
| V and R | — | V / R | — | V² / R |
| I and R | I · R | — | — | I² · R |
| V and P | — | P / V | V² / P | — |
| I and P | P / I | — | P / I² | — |
Common mistakes
- Entering three values: the tool wants exactly two; filling a third makes the result ambiguous.
- Mixing units: entering mA as A or kΩ as Ω throws the result off by 1000×.
- Treating motors and transformers as resistive: inductive loads need the power factor; this calculation is for resistive circuits.
- Using a heater's cold resistance: resistance can change at operating temperature.
Frequently asked questions
How many amps does a 2000 W heater draw at 230 V?
I = P / V = 2000 / 230 ≈ 8.7 A.
How do I find resistance?
Divide voltage by current (R = V / I) or the square of voltage by power (R = V² / P).
Does it apply to motors?
Inductive loads such as motors involve cos φ and efficiency; use the motor current tool for that.
Can I use it for motors?
No. Inductive loads such as motors and transformers involve power factor and efficiency; use our motor tool.
More tools
© ZDK Mühendislik — the software of this tool may not be copied or reused on other sites without permission.