« Tools · Electrical Calculators
Solar Panel Calculator
Enter your monthly consumption to see the number of panels, installed power, yearly production and approximate area required.
Get a quote for solar PV design, power factor correction and electrical contracting for your facility; engineering consultancy is also available.
Get a Quote »How to use
- Enter your average monthly electricity use (kWh) from your bill.
- Set the average daily peak sun hours for your region and the system efficiency.
- Enter panel power and area; panel count, installed power and production appear.
Method and assumptions
- Required power (kWp) = daily consumption / (peak sun hours × system efficiency). The panel count is rounded up.
- Peak sun hours (PSH) are the daily irradiation expressed as hours at 1 kW/m²; in Turkey the yearly average is roughly 3.5–5.5 hours depending on region (lower in the north, higher in the south). The default 4.5 is a typical middle value.
- System efficiency (about 75–85 %) covers inverter, cable, temperature and soiling losses. Area is the sum of panel areas; row spacing and shading must be assessed separately. Seasonal variation, storage and net metering are not included.
Worked example
Monthly use 350 kWh, peak sun hours 4.5, system efficiency 80%, panel rating 550 W, panel area 2.6 m².
Daily use = 350 / 30 = 11.67 kWh. Required power = 11.67 / (4.5 · 0.80) = 3.24 kWp. Number of panels = 3,240 / 550 = 5.9 → 6 panels (3.3 kWp). This system produces about 356 kWh a month (102% of use) and about 4,336 kWh a year. The area needed is about 15.6 m².
Required power by peak sun hours (350 kWh/month, 80% efficiency)
| Peak sun hours | Required power (kWp) | 550 W panels |
|---|---|---|
| 3.5 | 4.17 | 8 |
| 4.0 | 3.65 | 7 |
| 4.5 | 3.24 | 6 |
| 5.0 | 2.92 | 6 |
| 5.5 | 2.65 | 5 |
In Turkey the annual average peak sun hours are about 3.5-5.5 depending on region. For your site use a value from a solar atlas or an engineering calculation.
Common mistakes
- Confusing panel rating with output: a 550 W panel yields about 2-2.5 kWh a day after sun hours; peak power is not produced every hour.
- Ignoring shading: a chimney, tree or neighbouring building lowers output noticeably.
- Skipping orientation and tilt: a south-facing surface tilted close to the latitude is most productive; east-west and flat roofs behave differently.
- Ignoring the use profile: production is in the daytime, use may be in the evening; storage or net-metering rules change the result.
- Treating the result as a final design: this is a preliminary sizing; roof capacity, inverters, cables and grid-connection permits need their own design.
Frequently asked questions
How many panels for 350 kWh per month?
With the defaults (4.5 hours, 80 % efficiency, 550 W panels) about 6 panels, i.e. 3.3 kWp.
Where do I find peak sun hours?
Divide your region's yearly irradiation (kWh/m²·year) by 365; see sources such as an official solar potential atlas.
Can I install a system from this result?
No; this is preliminary sizing. Roof orientation and tilt, shading, inverter selection and regulations need a survey and design.
How many panels for 350 kWh a month?
With the default values (4.5 hours, 80% efficiency, 550 W panels) you need 6 panels, about 3.3 kWp.
How do I find my monthly use?
Look at the kWh values on your electricity bill; if use varies by season, divide the annual total by 12.
Can I build a system from this result?
No. The result gives a first idea; roof, shading, inverter, protection and grid-connection conditions must be designed by an engineer.
More tools
© ZDK Mühendislik — the software of this tool may not be copied or reused on other sites without permission.